Fe 227 or FM 200

From the time human has discovered fire, it's known that fire can spread within seconds wrecking lives and everything that comes in its way. FM 200 is the perfect fire extinguisher for that sensitive equipment in an organization that needs saving. FM 200, works through absorbing the heat that occurs when liquid changes to a gas. It is effective and fast-acting, taking fewer seconds to extinguish the fire. The colorless and odorless properties of FM 200 make it safe for people, has minimal impact on the environment, and is also extremely safe to use in occupied spaces. FM 200 requires small amounts of the agent to suppress fire which means fewer cylinders and lesser storage space are required. FM 200 is safe on equipment, which means less damage to those electricals and lower repair costs.

Carbon dioxide system

Carbon Dioxide is the trusted non-conductive clean agent and is most effective for dealing with electronic equipment fires. This system eliminates the Oxygen levels, thereby suffocating the fire. A Carbon dioxide system is used in less occupied places like parking garages, electronic equipment, vehicle/aircraft/marine service centres, and such. Carbon dioxide is suitable for use on Class B and Class C fires. Our residue-free wheeled Carbon dioxide units are designed for one-man operation and are constructed with spun steel cylinders and plated brass valve assemblies.

Sprinkler system

Simple and yet most effective fire control system used in commercial buildings. Sprinklers are both fire detection and suppression system, these systems trigger the detection of fire, discharging water from the sprinklers thus, suppressing the fire. Each of the sprinkler models is carefully checked and installed, they have extra protection level against inadvertent water discharge and are frequently employed in water-sensitive locations such as archival vaults, fine art storage rooms, rare book libraries, and computer centers. As an essential part of a wet sprinkler system, Wet Alarm Valve is used as a device that detects water flow in the fire equipment installed in a residential area, manufacturing area, and so on. They are “Standard and Quick response - standard orifice spray Sprinklers” intended for use in fire sprinkler systems designed in accordance with the Standard installation rules recognized by the applicable Listing or Approval agency.

Fire pump system

Fire pumps are installed to provide the required water pressure to the sprinklers or standpipe systems. Fire pump systems consist of a pump, a drive, a driver to connect the pump and the drive, and a base plate. Each of the fire pump systems is rigorously tested before being installed and are all certified. Fire pump systems are installed or used when a fire protection system is fed by inadequate pressure especially in buildings like warehouses and taller buildings. These fire pumps installed provide the required pressure to fight the fire and suppress fires on time before they cause further damage.

Bladder Tanks

Buckeye Fire Equipment manufactures a complete line of foam agents and hardware that when used in conjunction with one another make an unbeatable fire-fighting combination. Bladder tanks require just enough water supply for them to work. Buckeye’s foam team delivers an extensive selection of products that are earth-friendly, and FM approved. Various tests are conducted to ensure the high quality and performance that is promised to deliver. Vertical bladder tanks provided are of the highest quality designed to maximize performance.

Fire monitors

Fire monitor systems are installed for faster response, these monitors are installed to release large water flows or pressure to fight fire in high fire risk, hazardous areas. Fire monitors are installed for heavy-duty applications to withstand the extreme conditions. Fire monitors are installed in places like the industrial areas, chemical industries, larger buildings with expensive and risky assets and the majority human lives. Fire monitors are installed and tested to survive in the harshest of environments and provide the best performance even though it remains unused for years.

Foam chambers

Foam chambers are installed to discharge expanded foam directly onto the flammable surface for firefighting. Each of the foam chambers is following the NFPA standard 11, is rigorously tested before being installed thus resulting in efficient performance. Each of the foam chambers consists of an orifice plate that is replaceable when the design is changed, this orifice plate facilitates the flow and inlet pressure. These foam chambers facilitate the foam to move from the chamber to the deflector and then into storage tanks. Buckeye equipment offers superior quality foam chambers that are designed to maximize performance.

Hose Reel

PRESSURE Restricting ANGLE VALVE is used with a fire hose reel or rack assemblies or as a fire department outlet connection. hose reels have an extensive range of swinging & fixed type with manual & automatic operation to suit any architectural and installation requirements. Hose reel side plates are protected with a polyester powder coating that complies with salt spray test requirement which is specified in ISO 9227 for 240hrs. Hose reel drum has the formation of hydraulically pressed ribs to give extra strength and to avoid twisting. The sturdy material makes it the most sought-after system to suppress fire by schools, warehouses, and large office blocks. These are easy to repair, maintain, and clean.

Foam Concentrate

Buckeye’s foam concentrates are all manufactured without EPA reportable components, thus reducing environmental impact. Only Earth-friendly components are used making it easy for the clients and customers during the process of installation and also relieves you from the paperwork burden. Buckeye’s foam concentrate is of top quality that is neither harmful to the environment nor does it dilute the fire-fighting effectiveness. Like all other products, even foam concentrates are subjected to rigorous quality control standards and tough testing to ensure complete reliability and maximum firefighting performance.

Flame detector

Flame Detectors are the solution for those fires that are rapid at growth, which a human might be too late to notice, these detectors detect light or flame. Flame detectors work faster and are more accurate when compared to heat/smoke detectors. The LF-FD-6104 Intelligent UV Flame detectors has a wide angular sensitivity that can reliably and quickly detect the presence of a flame within its field of view by sensing the ultraviolet radiations emitted. Our flame detectors are certified by the civil defense- Sharjah. Flame detectors are mainly used in hydrogen stations, industrial heating, drying systems, industrial gas turbines, and other such dangerous places.

Smoke Detectors

Smoke detectors are devices that detect smoke or smoke particles that start to spread in the air as a result of fire, fast combustion, or slow smouldering fire. Smoke detectors are well suited for fires ranging from smouldering to flaming fires. Eagle module smoke detectors are all following the NFPA standards, they provide early detection of smoke or smoke particles and prevent the recirculation by handling the systems, fans, and blowers. All the products are run through rigorous tests and are certified by the civil defense and are up to the NFPA standards to make sure their performance is maximized, and you receive the best of the best protection against fire.

Heat Detectors

Heat detectors are devices that detect the heat levels in the atmosphere when the temperature is rapidly rising and gradually increasing. The heat detectors have an advanced method of detection, address programming, and supervision, combined with sophisticated control panel communication. Combined smoke and heat detector contain an optical smoke sensor and a thermistor temperature sensor whose outputs are combined to give the final analogue value. Each detector consists of a dust resistant, field-cleanable photoelectric chamber, and microprocessor-based electronics with a low-profile plastic housing. Heat detectors have a feature where one can pre-set the temperature.

Beam Detectors

Beam detectors are typical devices that use beam to detect smoke or to indicate fire. These detectors are mainly used in areas where the standard smoke and heat detectors are uneconomical to use like the height of the building is too tall, open areas, spacious rooms. Beam detectors work in the principle of light and smoke, once there is enough smoke to cover the light from the beam, indicating fire. The beam detectors go through tough tests multiple times to make sure that they perform their best and save lives and assets that are important.

Control Panels

Control panels are installed to activate the quick response in case of unfortunate fire accidents to avoid further damage to lives and assets. Control panels upon detection of fire alert the personnel and the residents of the building to evacuate the premises on time. These control panels have a microprocessor-based advanced detection and protection system. Control panels are programmed to be flexible and can use intelligent and conventional devices which makes them more and more reliable safety device. Control panels have sleek designs and are installed anywhere from hallways to corridors or even at the exits for easy access and operation. Control panels are tested and made sure they match the highest quality standards and provide quick responses during times of emergency.

Portable Gas Detectors

Portable gas detectors are referred to gas detectors worn or carried by an individual, used to detect toxic or combustible gas and oxygen deficiency in confined spaces. These detectors work by monitoring the different gas levels in the atmosphere, they send out loud warning signals once they detect any gas amount higher than usual thus saving numerous lives. These detectors are usually battery operated and are safe to use. These gas detectors come with different kinds of sensors like Catalytic bead sensors Electrochemical sensors Infra-Red Sensors and more.

Fixed gas Monitoring

Control panels are installed to activate the quick response in case of unfortunate fire accidents to avoid further damage to lives and assets. Control panels upon detection of fire alert the personnel and the residents of the building to evacuate the premises on time. These control panels have a microprocessor-based advanced detection and protection system. Control panels are programmed to be flexible and can use intelligent and conventional devices which makes them more and more reliable safety device. Control panels have sleek designs and are installed anywhere from hallways to corridors or even at the exits for easy access and operation. Control panels are tested and made sure they match the highest quality standards and provide quick responses during times of emergency.

NOVEC 1230

High Pressure Efficiency Using Low Pressure Hardware

For years, engineered fire suppression systems have either been engineered with very high pressure, necessitating more expensive hardware and supplemental nitrogen driving systems, or have subscribed to a conventional low pressure that was a carryover from the limitations of the agent they contained.

The properties of 3M™ Novec™ 1230 Fire Suppression Fluid are very different than those of other Halon alternative gases, and with the introduction of the new 500psi systems, Regulus has optimized systems to take full advantage of the hardware and agent.

Foam Extinguisher

Foam extinguishers work by firstly applying a film forming foam (bubbles) to the fire which causes a blanket over the fire suffocating the fire, while almost simultaneously cooling the fire. Foam fire extinguishers are EN3 Kitemark approval by BSI in the UK and CE marked. Foam extinguishers have High fire ratings offering maximum firefighting ability and leave a minimal residue when applied. Foam extinguishers are easy to use, refill, and maintain, can be used in confined spaces, and electrical appliances.

Dry Chemical Extinguisher

Dry chemical extinguishers work by coating a layer of dust separating the oxygen from the fuel in the air and thus suppressing the fire. Various kinds of dry chemical extinguishers are available like the ABC Dry chemicals which are multipurpose suitable for class A, B, and C fires. Standard (BC) Dry Chemical is a sodium bicarbonate based extinguishing agent that is suitable for use on Class B and Class C fires. Purple K Dry Chemical is a high-performance extinguishing agent most effective for dealing with flammable liquid fires. Purple K is suitable for use on Class B and Class C fires. The dry chemical extinguishers are usually used in public areas such as offices, classrooms, churches, parking garages, and hotel/motel assembly halls and guest areas, retail stores, light manufacturing facilities, research facilities, auto dealerships, vehicle/ aircraft/marine service centres, and manufacturing processes such as painting, dipping, and coating.

Carbon dioxide Extinguisher

Carbon dioxide extinguishers are filled with non-flammable Carbon dioxide gas with extreme pressure, the pressure in the cylinder is so great that when released bits of ice may shoot out the horn. When the carbon dioxide is released into the air, the oxygen is neutralized thus helping kill the fire. These extinguishers are perfect for the places where there is electrical equipment involved like the server rooms. Carbon dioxide extinguishers are used on Class B fires as well, they do not leave any residue behind, easy to store, and come in various sizes.

Water Extinguisher

Water extinguishers are the most effective firefighting tool so far, they work the same as the foam by taking away the heating element that causes the fire to spread rapidly. Water extinguishers are used for class A fires only to avoid hazardous situations. Water extinguishers are EN3 Kitemark approved by BSI in the UK and CE marked. These extinguishers are specially designed for best discharge, accuracy, and timely response, they are built such that even untrained personnel can use them. Water extinguishers are easy to refill and go through rigorous testing to make sure maximum performance and timely response.

Central Battery System

Central Battery System for Emergency Lighting means, that the backup power source for the Emergency and Exit Lights is provided centrally. In other words, each Emergency and Exit Light does not need to have a battery or super capacitor of their own. SESSCO has the capability to supply and install central battery systems of different brands and models at the most competitive rates

Central Monitoring System

The central monitoring system is designed to monitor the entire emergency lighting system no matter how complicated a location is. All the information is monitored and collected at one place and even the data about performed tests are collected, making it easy for the personnel to analyse and respond to an emergency on time. The reports collected at one place makes it easy for the personnel to conduct maintenance and take necessary action for that particular luminaire that is causing issues. Central monitoring systems are the most effective and easy to maintain.

Self-Contained System

A self-contained system is a device that illuminates the emergency and exit lights in case of an emergency. These systems are easy simple and quickest to install and maintain, they have their own batteries and operate independently. Self-contained systems are most cost-effective for small and medium-sized buildings since no extra cabling is required as compared to other systems. The self-contained system is certified and is tested rigorously to ensure quality, quick response, and reliability at times of emergencies.